Instructions for installation:

1. Double click cldashel8.exe
2. Make sure the path that is listed is in fact the path to which you
   Have Nitro installed.
3. If it's not the correct path, change the path.
4. If you don't know if it's the correct path, verify that "C" is the
   letter of your hard drive... chances are it is. If it is not, change
   the C in the path to the correct letter.
5. Click unzip
6. Repeat steps 1-5 using the cldashel16.exe file instead of the cldashel8.exe
7. Run Nitro Pack, your new map should be at the bottom of the list in 
   either of the "melee" options.